Pipelayer TG35.80 HST
Pipelayer TG35.80 HST

Pipelayer TG35.80 HST

Download booklet PDF


Safe and reliable pipelayer model

Pipelayer TG 35.80 HST designed for laying pipes in the trench, maintenance of treatment machines and for handling during construction.

Model TG35.80 HST is equipped with a powerful engine YMZ-238, a running group on seven-wheel trucks and a 9-meter boom.

The load limiter provides overload protection and protection when working on the power line.

Panoramic double glazing allows you to increase the visibility from the cab, which guarantees the safety and comfort of the operator.



Type YMZ-238
Power kW /HP 242/330
Min.specific consumption g / kW (g / Ls) 214 (157)
Working volume 14,86 l
Torque /
the stock torque /
torque / power
1180 Nm at 1200-1400 rpm
Electric starter Сt25.3708-01 / 8,1 кВт 
Generator 24 В / 80 А
Accumulator 2*12V / 380 Ah
Pre-heating with the auxiliary heating
Teplostar 14TS-10


Type Rigid, four-point
Frame Load-bearing structure made of high-strength steel, welded with high precision
Rinks With lubrication for the entire service life, on sliding bearings (bushings)
Number of rollers 7 supports on each side / 2 supports on each side
Crawler belt /
The width of the shoe / Grouser
45 reinforced shoes on each side
900 mm
65 mm
The mechanism of a tension of caterpillars Hydraulic, manual


Type Hydrostatic Bosch-Rexroth (Germany) / or equivalent (Germany-Italy)
Transmission Executed by a pair of hydraulic Pump-hydraulic Motor with stepless gear shift
Board reducers Planetary (Germany/Italy)
Control Electro-Hydrocarbonbased
Brake system Hydraulic (hydraulic lock), normally closed multi-disc clutches

Hinged equipment control system

Type Hydraulic, remote-cylinder
Hydraulic pump PSM 310.80
Maximum pressure 28 MPa;
Hydraulic distributor Sectional (Belarus)
Filtration Double cleaning: on suction
full-flow on drain

Operator's seat. Motion control

Cabin Hexagonal, increased visibility with double glazing, sprung
Emergency hatch (optional), FOPS, external battery compartment
Ergonomic, with seat belt
Traffic control equipment and accessories
Joysticks, 4-position

Filling volumes

Cooling system 60 l
Fuel tank
500 l
Lubrication system of the internal combustion engine
32 l
Side gear 8 l
Transmission hydraulic system and hydraulic system of attachments
200 l

Working mass

Weight, t 51
Specific ground pressure (from equipment)
0.09 MPa

Pipe-laying equipment

Lifting capacity at the boom reach 2.5 m (1.22 m), t 30 (61)
Winch 2 pieces with hydraulic drive
Boom length, m 8,6
Boom length, m 1,9
Hook single
Weight of counterweights with frame, t 9
The size of the rope diameter x length hook: 21mm x 74m / 21mm x 84M
boom: 21 mm x 68 m / 21 mm x 78 m

Standard equipment

Lighting devices-four front and two rear lights
Dry type air cleaner with dust remover and dust indicator
Set of tools
Solid book at the bottom
Fire extinguisher mount
Sun visor

Equipment in an additional complete set

Lighting 3-lamp on the hook, adjustable in the direction
View camera with monitor 4 cameras: hook, Congrus, cab-front, back
Bumpers on the arrow rubber, with a bend on the ribs
Vertical boom lift 90o

Safety device

ACP-110 - for protection from overload and tipping over of the goods (or the analogue)
Protection when working in the area of power lines
Data on the weight of the lifted load, the maximum load capacity, the value of the boom departure, the angle of the boom relative to the horizon.
The pointer of the boom to determine the maximum carrying capacity
Light and sound alarm devices, flashing light and buzzer, triggered in parallel with the load limiter
Limiter for automatic stop of hook
Device for automatic stop of the boom in the extreme position

�������� �����

Pipelayer ТG20.45



240 hp 20 load-lifting, t
Pipelayer ТG12.25



180 hp 12 load-lifting